|
The transfer switch monitors utility power and signals the
generator to start when utility power is interrupted. When
utility power returns, the transfer switch returns the electrical
load from the generator back to the utility. This ensures
your most important electrical loads are powered, within seconds,
even when you're away. No toggles to flip, no knobs to turn,
no extension cords to run when you lose utility power. You
will have the comfort and peace-of-mind knowing that your
GUARDIAN standby generator does everything for you... automatically.
RTS transfer switches are designed for a wide variety of
applications that require up to 400 amps. The RTS is integrated
with the R-Series digital controller and operate only with
standby generators thru 60kW. All RTS transfer switches come
standard with NEMA 3R enclosures and are suitable for outdoor
mounting.
- A two pole, 100-amp ATS with integrated
load center is standard equipment on all air-cooled prepackaged
models up to 16 kW .
- A two pole, 200-amp ATS with Service Disconnect
is standard equipment on the Guardian Elite 18 kW model.
- Transfer switches must be purchased separately
for stand-alone air-cooled models and all liquid-cooled
models.
RTS-N Standard Transfer Switches
(Single-phase and Three-phase)
Use RTS-N models for custom installations
or with applications that require a sub-panel.
- 100, 200, or 400 amp
- Includes transfer switch only
- UL Listed
RTS-E Transfer Switches with Service Disconnect
(Single-phase Only)
Use RTS-E models with service disconnect for quick and easy
installations. These transfer switches eliminate the need
for a separate main circuit breaker to be installed between
the utility meter and the transfer switch in whole-house transfer
setups.
- 100, 200, or 400 amp
- Service-entrance rated
- UL Listed
Contact Tampa Generators today to determine the best generator
system to meet your needs and your budget!
|
